In this video we talk about the different steps of constructing a Hoop House.
Picking the location.
Setting the foundation.
Setting up the rafters.
Setting up rafters.
Putting in the baseboard.
Update: Here is a link showing some of the steps of the actual construction. http://youtu.be/EU1pykhIK_A
PDF Manual: http://www.growerssupply.com/wcsstore/EngineeringServices/allbizunits/techdocs/PB01725_35R6.pdf
Great to see that woodprix has new instructions to save my money and energy to build it.
yes, it is useful
this was NOT cheap
Excellent video ,learned a lot. I'm sure whoever clicked dislike , did so by accident
I believe Ces Gar was talking about the Stirrup Clamps at time index 12:52. that hold the rafters together???
Tip for safe guarding your pin you insert into the grounded pipes so you don't loose it.. Take a piece of PVC pipe the same size of your pin (at time index 4:45) about 2 to 3 inches long. Cut 1/3 off the side. This makes a 3" long clip to pop onto your pin to prevent it from dropping down into the pipe. My 2 cents worth. Very well said. You described in great detail how to put up a hoop house frame and that will help me a lot. You mentioned a lot of things I was not aware of. Looking forward to the second part of your video on your hoop house. Oh, by the way, find out what was making the banging noise while you were in shed. Very distracting while listening to you.
Rafter Joint = End Clamp & Cross Connector
Check out page 5 in the PDF listed above
PLEASE, Can you tell me the name of the piece that holds the two pipes together at video time 12:52? THANK YOU!