The School of Aquaponics
This video discusses the differences between using a chemical analysis and electronic device to test various water parameters in Aquaponics. You’ll see which is best for you and your circumstance in this video.
Enroll in my FREE course to get additional information about aquaponics! I also have for you a FREE downloadable document called the “Aquaponics Starter Guide” that you get when you enroll today!
Click the link below to enroll in the course.
https://theschoolofaquaponics.com/p/a…
Did you receive value from the videos and want to support the channel? You can donate any amount here https://paypal.me/theschoolofaquaponi…
source
The School of Aquaponics
Is there a way to increase the water hardness without increasing the ph too much? I have a ph of between 7.6 – 7.8 but KH is about 71.6ppm.
How reliable is a ph meter? I have a small 10 gallon system and the solution test says 7.6 – 7.8 but the meter says 7.4. It is freshly calibrated.
Sparkfun uses a Red Board (Arduino clone) with a various probes to digitally test water quality. Which can be sent to a data logger for trend analysis. Vernier probes can be ordered from http://www.vernier.com and http://www.sparkfun.com. The number and locations of probes can be pricey and may not be suitable for some hobby growers.
I worked for this company years ago and we produced equipment to sample ph, salinity, conductivity, temperature, pressure and dissolved oxygen. https://www.seabird.com
i think she ment to ask if its ok for the roots in the water to move around alot. like for example the bubble machine creats allot of turbulence which maybe is anoing for the plants. maybe they would rather like, somthing more of a still environment?
i see you got allot of bubbles in your dwc but maybe its not that drastically turbulent your water.
i think to grow duck weed you need the water to be calm, right?
👍
Brooklyn thank you again for the hard work and dedication you put in. Keep up the Amazing Work. Health and Wealth.
Enjoying all of your videos just a quick word of caution digital PH meters probe storage and calibration is key to making sure you're getting accurate information I have seen way too many applications we're chemical adjustments were made due to inaccurate information from a digital pH meter that wasn't properly stored and calibrated
Thank you so much✨🌟💗🌟💜🌟✨
🌟💗💜💜💜💜🌟
🌟💗💜💜💜💜🌟
🌟✨💜💜💜✨🌟
🌟✨✨💜✨✨🌟
✨🐬✨🐬✨🐬✨
🌊🌊🌊🐬🌊🌊🌊
Where is Carlos?
All the chemical tests that I'm familiar with rely on color gradients. There has to be some phone app that can take a pic of the dip stick or test tube and tell you what it rates on the chart.
Keep it up man 👊👌