in

High Pressure Aeroponics System Components Explained

High Pressure Aeroponics System Components Explained



Learn about the primary components of a high-pressure aeroponics system. We will explain the purpose and function of each of the components. This video will give you a basic understanding so you know what goes in building it yourself (DIY).

Free Video Course – How to choose the pump for a high-pressure aeroponics system:
https://aeroponicsdiy.com/free-aeroponics-video-course/

source

High Tech Gardener

Report

What do you think?

Comments

  1. Can you provide a list of the products uses. I searched for the puml
    P but maybe i misjnderstood you cause i can only find a aqautech pump. Not an ekotech like it sounds like you said?

  2. The best part about building your own aeroponic system is all the learning you do iterating upon your own design that you would otherwise miss using an off the shelf system.

  3. Hi, I am having a bit of trouble and a bit confused with my set up. I have a mistking repeat cycle timer which is connected directly to the diaphragm pump (75 PSI to Max 125 PSI) , minus a solenoid valve.

    In your video you said the solenoid valve basically tells the pump when to turn on and off. I thought that was the function of the repeat cycle timer. I have set my pump to mist for 5 seconds and to turn off for 10 minutes, and this seems to be working fine without the pressure switch or solenoid valve. The pressure gauge is all over the place but it seems to be flickering between 100 PSI and 125 PSI. I have an accumulator tank but could not connect this because I could not find the correct reducer from 1/2"bsp to 1/4" push fit (This is now in the mail).

    When I connect my pressure switch and start the timer, the pump comes on and then cuts out at about 80 PSI.

    Can you please help? I feel like I have reached a dead end.

  4. I have a question. Do we need the pressure switch if we are planning on running an auto recycler timer? You say we need the pressure switch to control the pump on and off, but if I am running a recycler timer, say 5 seconds on/2.5 minutes off, then why would I need a pressure switch to control the pump?

  5. Thanks for the video. One thing I don't understand is how the water from the tank gets to the spray nozzles. I only understand how the pump sends water into the tank. How does the water get from the tank to the nozzles?

    🙏Thanks

  6. When you are building the misting system, are the misting heads supposed to be in parallel or in series? If they are chained one after another in series would the pressure vary?

  7. Great video!, where can we find a list of these components with the model to buy exactly the ones you explain? I got the aquatec 8800 and the tank,. Thanks

  8. The instructor knows how to teach! I've reviewed several other videos on youtube and ALL were confusing. This video was the FIRST that was simple, and yet detailed enough for me to completely understand a high-pressure system. Kudos to this gentleman.

Loading…

0
UPDATE How to Automate Your Hydroponic Flood and Drain | Auto Ebb and Flow for Horticulture Garden

UPDATE How to Automate Your Hydroponic Flood and Drain | Auto Ebb and Flow for Horticulture Garden

Aeroponics Droplet Size for High-Pressure Systems

Aeroponics Droplet Size for High-Pressure Systems